Automotive Products

PAINT STRIPPERS

Professional formulations for automotive coating removal

PRODUCT	MAIN TASK	DESCRIPTION	KEY PARAMETERS	PACKAGING
APS-M10 Heavy-Duty Paint Stripper	Removes chemically resistant, multilayer coatings	For removing polyurethane, epoxy (including heat-cured), acrylic and other chemically resistant coatings from copper, steel, aluminum, concrete, brick and wood. Suitable for sloped, vertical and overhead surfaces.	Acid-based stripper Application: brush, roller, airless spray Dwell time: 2–60 min. Coverage: 200–700 g/m² Working temp.: −15…+32 °C	Canister: 25 kg
APS-A10n Industrial Stripper for Difficult Coatings	Removes powder coatings and modern automotive finishes	APS-A10 automotive finish remover is designed for difficult, highly polymerized coatings, including alkyd, nitrocellulose, acrylic, epoxy, polyurethane, powder, polyester and others. Removes coatings from aluminum, steel, concrete, brick and other surfaces.	Basic stripper Application: brush, roller, airless spray Dwell time: 15–60 min. Coverage: 200–700 g/m² Working temp.: −5…+32 °C	Canister: 25 kg
APS-A25 Immersion Paint Stripper	Removes a wide range of coatings by immersion	Industrial stripper for chemically resistant coatings by immersion. Ideal for removing paint from small removable parts. Used for stripping and recoating wheel rims.	Basic stripper Application: immersion Dwell time: 15–60 min. Working temp.: +10…+40 °C	Canister: 25 kg

Test on a small area before use. Follow the instructions and Safety Data Sheet requirements.

SOLVENTS

Degreasing, coating thinning, equipment flushing and final cleaning

PRODUCT

MAIN TASK

DESCRIPTION

KEY PARAMETERS

PACKAGING

ALT 602/218

Cleaning Solvent

Thinning coatings and final surface cleaning

Used for coating thinning, final cleaning before painting, removal of APS stripper residues, cleaning equipment and brushes, and removing bitumen and dirt. Evaporates quickly and completely, leaves no streaks and improves coating adhesion.

Application: cloth or spray
Coverage: 50–200 g/m²
Working temp.: +5…+40 °C

Canister: 18 kg

CORROSION PROTECTION COMPOUNDS

Formulations for corrosion protection of painted and unpainted metal surfaces

PRODUCT

MAIN TASK

DESCRIPTION

KEY PARAMETERS

PACKAGING

AVIAPIK-7

Corrosion Protection Coating

For internal surfaces and cavities

Provides long-term supplementary corrosion protection for internal surfaces of ferrous and non-ferrous metal components. Can be applied to painted and unpainted surfaces. Penetrates gaps and hard-to-reach areas, dries across a wide temperature and humidity range, and remains non-tacky after drying. Retains elasticity throughout service life. The applied film has low weight.

Application: spray, dip, brush
Use: +15…+30 °C

Canister 4 kg

For detailed information, please request the TDS and SDS by email: info@aviapeak.com