Construction Products

PAINT STRIPPERS

Professional formulations for construction coating removal

PRODUCT	MAIN TASK	DESCRIPTION	KEY PARAMETERS
APS-M10 Heavy-Duty Paint Stripper	Removes chemically resistant, multilayer coatings	For removing polyurethane, epoxy (including heat-cured), acrylic and other chemically resistant coatings from copper, steel, aluminum, concrete, brick and wood. Suitable for sloped, vertical and overhead surfaces.	Acid-based stripper Application: brush, roller, airless spray Dwell time: 2–60 min. Coverage: 200–700 g/m² Working temp.: −15…+32 °C
APS-A77 Universal Repair Stripper	Removes a wide range of coatings during repairs	Effectively removes alkyd, nitrocellulose, acrylic, epoxy, polyurethane, powder and polyester coatings from aluminum, steel, concrete, brick and other surfaces. Can be applied to damp surfaces and contains no acids.	Basic stripper Application: brush, roller, airless spray Dwell time: 10–50 min. Coverage: 500–1000 g/m² Working temp.: +10…+25 °C
APS-A7, APS-A7n Universal Industrial Strippers	Removes paint from building facades and structures	Quickly removes polyurethane, epoxy, acrylic, powder and other coatings from metal, concrete and brick. Widely used in repair and construction, and for repainting industrial facilities, marine, road and rail transport.	Basic stripper Application: brush, pour, airless spray Dwell time: 10–60 min. Coverage: 600–1000 g/m² Working temp.: 0…+32 °C
APS-Eco7 Water-Based Paint Stripper	Water-based stripper for metals, minerals and plastics	Advanced water-based formula. Removes alkyd, nitrocellulose, acrylic, epoxy, polyurethane and powder coatings from metals, mineral surfaces and many plastics. Suitable for PVC, PP, PE and PET; remains wet for a long time.	Water-based Application: brush, pour, airless spray Dwell time: 30 min.–24 h Coverage: 500–1000 g/m² Working temp.: +10…+40 °C

Test on a small area before use. Follow the instructions and Safety Data Sheet requirements.

SOLVENTS AND CLEANERS

Degreasing, coating thinning, equipment flushing and final cleaning, cement and epoxy grout removing

PRODUCT	MAIN TASK	DESCRIPTION	KEY PARAMETERS
ALT 602/218 Cleaning Solvent	Thinning coatings and final surface cleaning	Used for coating thinning, final cleaning before painting, removal of APS stripper residues, cleaning equipment and brushes, and removing bitumen and dirt. Evaporates quickly and completely, leaves no streaks and improves coating adhesion.	Application: cloth or spray Coverage: 50–200 g/m² Working temp.: +5…+40 °C
APS-S59 Industrial Solvent	Industrial cleaning, thinning and equipment flushing	Ready-to-use solvent with a moderate evaporation rate. Used for thinning coatings, surface preparation before painting, removing stripper residues, flushing equipment, and removing bitumen, corrosion-protection coatings and other contaminants.	Application: cloth or spray Coverage: 50–200 g/m² Working temp.: +5…+40 °C
APS-S7 Universal Aerosol Cleaner	Cleans and degreases hard-to-reach areas	Removes graffiti, silicone, bitumen and other contaminants; cleans brake discs and APS stripper residues. Evaporates completely and contains no oily components.	Aerosol application Working temp.: −5…+35 °C
APS-C7 Universal Cleaner	Removes construction, road and household dirt	For cleaning tile, marble, granite, ceramics, metal, plastics, synthetic leather and fabrics. Removes epoxy grout residue, construction dirt, adhesive-tape marks and road grime. Retains cleaning power in hard water.	Application: brush, roller, sponge, pour, spray Dwell time: 5–15 min. Water dilution: up to 1:3 Working temp.: +5…+35 °C
APS-K6 Cement Remover	Removes cement and mineral deposits	Acid cleaner for removing cement, cement grout, tile adhesive, carbonate and salt deposits, lime, scale, rust streaks and efflorescence from acid-resistant surfaces and tools.	Application: brush, roller, pour, spray Dwell time: 5–15 min. Dilution: 1:20–1:4 Working temp.: +5…+50 °C
APS-K2 Cement Grout Remover	Removes cement grout residue, cement and lime deposits	Acid cleaner for removing cement grout residue, cement and lime deposits. Suitable for ceramic tile and mosaics, clinker façade tile and lime-free artificial stone.	Application: brush, roller, sponge, pour, spray Dwell time: 5–15 min. Working temp.: +5…+50 °C

Test on a small area before use. Follow the instructions and Safety Data Sheet requirements.

For detailed information, please request the TDS and SDS by email: info@aviapeak.com

Products for Construction Industry

PAINT STRIPPERS

SOLVENTS AND CLEANERS